Setting the properties of the
display/operator system
36
09/10 MN05013011Z-EN
Changing the contrast
If the main menu of the display/operator system is not active,
press the “*” button to enter the menu.
X
Use the
Í
and
Ú
buttons to select the Contrast menu
item.
The cursor moves to the percentage value of the contrast.
X
Confirm with
OK
.
Use the
Í
and
Ú
buttons to change the value between
-2 and +2 in increments of 1.
X
Press the
Í
or
Ú
buttons to change the value.
X
Press
OK
or
ESC
to exit Edit mode.
Special function
COM...
MENU LANGUAGE...
LIGHTING:
70
%
CONTRAST
:
+2
h
When Selection mode is active, the cursor appears as
black flashing rectangle. Pressing OK will activate Edit
mode in which the cursor will disappear and the number
will flash. In Edit mode, use the
Í
and
Ú
buttons to
change the value. The changes are displayed immediately.
COM...
MENU LANGUAGE...
LIGHTING: 70%
CONTRAST
:
+1
+
If th display/operator system is connected with an MFD in
graphic mode, you can terminate the graphic mode of this
device by pressing the ALT and ESC buttons simultaneously.
This function can also be performed on the MFD device by
pressing the “*”.
ALT
ESC
