9
09/10 MN05013011Z-EN
2
Device application
The display/operator system enables you to externally carry
out the same display/operator functions of an easy500,
easy700, easy800, easySafety or an MFD (MFD…CP8/CP10
or MFD…CP8/CP10 with MFD-80-B). If, for example, one of
the devices is fitted in the control cabinet, the display/oper-
ator unit can be installed in the control cabinet door to
provide display and operator functions. A cable is used to
connect up the devices. The device can operate as a stand-
alone device in the control cabinet or can be a station on the
easyNet.
Connecting the display/
operator system with a
single device
You can access a single device with the display/operator
system. By connecting the display/operator system to a
device, it is possible to also transfer the display content of
this device to the display of the display/operator system. The
buttons on the display/operator system can be used to
control the device.
Figure 4:
Display/operator system connected with a single
device
C
S
E
K
O
L
E
D
L
A T
C
S
E
K
O
L
E
D
L
A T
