Setting the properties of the
display/operator system
30
09/10 MN05013011Z-EN
Terminal/local mode
You can choose between Terminal and Local modes:
In Terminal mode, the display/operator system communi-
cates with the connected device, e.g. easy800. The display
and button functions of the easy800 are taken over by the
display/operator system.
When the display/operator system is in Local mode, you can
set the connection and the properties of the display/operator
system.
Connection (COM menu item)
• Station ID = 0, 1 - 8
– 0: The display/operator system communicates with the
actual connected device.
– 1 - 8: Selecting the stations (-ID) on the easyNet
• Baud rate: 9600 (19200) baud
Properties of the display/operator system
• Contrast
• Backlight
• Menu language: adaption to the language
Switching between Terminal/Local mode
If Terminal mode is active, you can switch to Local mode by
pressing the “*” button.
Figure 22:
Toggling Terminal mode
t
Local mode
Changing to Terminal mode can only be carried out from the
main menu of Local mode.
