18
Sit-to-Stand Techbench
Installation Manual
SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
SECTION V - Corner and linear accessories
P x 4
K x 2
Hardware
required
D. Cable chain installation
•
The cable chain can be mounted from either left or right side
of the back of the work surface – near the cable grommets�
•
Determine which side that the cable chain will be assembled�
•
Assemble chain bracket with (2) 10-32x
1
/
2
" lg� Philip’s pan
head screws to back panel�
•
Assemble cable chain to work surface� Thread (2) #10x/1" lg
Philip’s pan screws thru chain and into holes in work surface
near cable grommet�
•
Assemble opposite end of chain to bottom side chain bracket
using (2) #10-32x
1
/
2
" lg� self-tap screws�
10-32x
1
/
2
" lg. Phillips pan head screw
Hardware P (2)
10-32x
1
/
2
" lg. Phillips pan head screw
Hardware P (2)
#10-32x1" lg. Phillips pan head screw
Hardware K (2)
Cable grommet
Cable chain mounting
bracket holes
Chain bracket
Cable chain
