17
SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
Sit-to-Stand Techbench
Installation Manual
SECTION V - Corner and linear accessories
M x 4
Hardware
required
C. Caster and foot rest installation
•
The casters replace the installed Levelers� Tip the bench on
its back, exposing the (4) levelers�
•
Remove the leveler and check nut on each foot�
•
To assemble caster, align (4) mounting holes in bottom of
foot with slots in caster�
•
Assemble caster to foot using (4) 1/4-20 x ½" lg hex head self-
taping screws�
•
Repeat for the reminder casters�
•
To install foot rest use (4) 1/4-20x½" lg hex head self-tap
screws as shown
WARNING
USE CAUTION WHEN LIFTING WORK SURFACE. TWO PEOPLE
ARE REQUIRED TO AVOID INJURY.
TO AVOID INJURY, IT IS REQUIRED THAT A FOOT REST OR
FULL SHELF OPTION MUST BE INSTALLED.
ON EXISTING BENCHES WHEN ADDING CASTERS IT IS
REQUIRED THAT THE BENCH BE PLACED ON ITS BACK BEFORE
CASTER INSTALLATION.
Mounting holes
in foot
Foot rest
Caster
1
/
4
-20 x
1
/
2
" lg hex head
self-tap screw
1
/
4
-20 x
1
/
2
" lg hex
head self-tap screw