12
Sit-to-Stand Techbench
Installation Manual
SIT-TO-STAND TECHBENCH INSTALLATION MANUAL
Eaton.com/techbench
Work surface
stiffener - slot
Work surface
stiffener
Work surface
stiffener - hole
6mm id
nylon washer
hardware D
M6 shoulder screw
hardware C
M6 x 14mm Allen
screw hardware B
6mm id steel
washer hardware E
Lift motor
F. Leg assembly
•
With 6mm id steel washer, hardware E and M6 x 14mm
Allen head screw, hardware B, thread (8x) thru work
surface stiffener
(holes -not slots)
into motor mounting
holes�
HAND TIGHTEN ONLY
•
With 6mm id nylon washer, hardware D and M6 x 6mm
shoulder screw, hardware C, thread (8x) thru work
surface stiffener
(slots-not holes)
into motor mounting
holes�
HAND TIGHTEN ONLY
B x 8
C x 8
D x 8
E x 8
Hardware
required
SECTION III - Assembling the corner
and linear bench
