manualshive.com logo in svg

Eaton INDGW-X2, User Manual

Share
Download
Eaton INDGW-X2 User Manual Download Page 208

   Installing the EMP

Servicing the EMP  –  210

Bottom mounting                         

Side mounting                              

6.3.2.3  Wall mounting with screws example

To mount the EMP on the wall close to the rack, use the supplied screw and screw anchor. Then, mount 
the EMP on the screw and tighten it.

6.3.2.4  Wall mounting with nylon fastener example

To  mount  the  EMP  within  the  enclosure  environment,  attach  one  nylon  fastener  to  the  EMP  and  the  other  nylon  fastener  to  an 
enclosure rail post. Then, press the two nylon strips together to secure the EMP to the rail post.

Cut nylon fastener and stick it on the EMP bottom on the location highlighted below,this will prevent to interfere 
with the EMP data acquisition parts.

Summary of Contents for INDGW-X2


















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands