Eaton INDGW-X2 User Manual Download Page 157

Page: 157 / 273

User profile

Contextual help of the web interface – 159

3.10.8.1 For other access rights

3.11 User profile

3.11.1 Access to the user profile

Press the icon on the top right side of the page to access the user profile window:

3.11.2 User profile

This page displays the current username with its realm (local, remote) and allows to Change passwords, Edit account and Log out.

For other access rights, see the

Information>>>Access rights per profiles

section.

This page is in read-only mode when connected through LDAP and it displays the preferences applied to all LDAP
users as configured in the

Contextual help>>>Settings>>>Remote users>>>LDAP

section.

Summary of Contents for INDGW-X2


















































































































































































































































































Search results

Summary of Contents for INDGW-X2

Reviews:

Brands by name

Popular brands

Eaton INDGW-X2, User Manual

Search results

Summary of Contents for INDGW-X2

Reviews:

Brands by name

Popular brands