background image

12

TC-1 Timeclock User Guide

www.eaton.com/lightingsystems

4.  

Use the number keys to enter the area number that should be issued the 
command (areas 0 through 255 supported). Press ‘ent’ to advance to the zone 
(channel) entry field. 
Use the number keys to enter the desired zone (channel) (zones 0 through 65535 
supported). Press ‘ent’ to advance the screen.

Enter area & zone  

5.  

Use the number keys to enter the desired light level (areas 0% through 100% 
supported). Press ‘ent’ to advance to the fade time screen.

Enter light level  

6.  

Next select the period of time it should take to transition to the defined light 
level. Use the ‘A’ key to increase the fade time or the ‘B’ key to decrease the 
fade time. (range 0 milliseconds through 60 minutes supported). Press ‘ent’ to 
save the event and return to the main time clock display.

 or 

      

Programming an Event to Issue a Sequence Command

Sequences may be programmed into the time clock to allow for multiple or specialized actions to be triggered by a single 
event. Sequences are only programmable by using iLumin Plus software. Once a sequence has been programmed, it is 
possible to use the time clock keypad to program an event to start, stop, or pause this pre-defined sequence. This will 
require knowledge of the sequence numbers that are used and a clear understanding of the sequence’s actions and purpose. 

An event sequence command may start the sequence, stop the sequence, or pause the sequence. To program a sequence 
action:

Screen

Instructions

Keypad

1.  

Program the event parameters for a specific time or to use the astronomical 
clock as instructed in the previous sections.

2.  

When the action change screen is displayed, if the action displayed under the 
action change screen does not display the desired sequence action, press ‘1’ 
for Y(yes) to change the action type, or press ‘0’ for N(no) to leave the action as 
displayed. Press the ‘ent’ key to advance the screen.

  or  

     

3.  

Press the ‘A’ or ‘B’ key to scroll through the actions until the desired sequence 
command is displayed. Sequence commands include, ‘Start Sequence’, ‘Stop 
Sequence’, or ‘Pause Sequence’. Press the ‘ent’ key to advance the screen.

 or 

      

4.  

All sequence commands will request the sequence number be entered. Use 
the number keys to enter the desired sequence number (sequences 1 through 8 
supported).  
For a ‘Start Sequence’ action, press ‘ent’ to advance to the ‘1st Action’ entry 
field and enter the line number of the sequence that should be commanded with 
this event (action lines 1 through 29 supported). Pause and stop sequence com-
mands will not display this option. 
Press ‘ent’ to save the event and return to the main time clock display.

Enter sequence number & 
action line  

Summary of Contents for iLumin Plus TC1















Reviews: