background image

Document:     UIG-2    73-898-00     IM8840     Iss.02

Eaton - Lighting Systems

20 Greenhill Crescent, Watford Business Park, 
Watford, Herts, WD18 8XG. UK
T: +44 (0)1923 495495     F: +44 (0)1923 228796 
E: [email protected]     EatonLightingSystems.com

iLight Technical  Support

Tel: +44 (0)844 324 9100   

(available Mon-Fri 9am-5pm GMT)

Email: [email protected]

Web: www.iLight.co.uk

All products manufactured by Cooper Controls Ltd and identified with the iLight product series 
mark are warranted to be free from defects in material and workmanship and shall conform to and 
perform in accordance with Seller’s written specifications. 

For detailed warranty information, visit our website at www.coopercontrol.com

This warranty will be limited to the repair or replacement, at Seller’s discretion, of any such goods 
found to be defective, upon their authorized return to Seller. This limited warranty does not apply 
if the goods have been damaged by accident, abuse, misuse, modification or misapplication, by 
damage during shipment or by improper service.

There are no warranties, which extend beyond the hereinabove-limited warranty,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE 
IMPLIED WARRANTY OF FITNESS. 

No employee, agent, dealer, or other person is authorised to give any warranties on behalf of the 
Seller or to assume for the Seller any other liability in connection with any of its goods except in 
writing and signed by the Seller. The Seller makes no representation that the goods comply with 
any present or future federal, state or local regulation or ordinance. Compliance is the Buyer’s 
responsibility.

!

WARNING HAZARDOUS VOLTAGES

DISCONNECT FROM SUPPLY 

BEFORE REMOVING COVERS

NO USER SERVICEABLE PARTS INSIDE

SERVICE BY QUALIFIED PERSONNEL ONLY

WARNING

To reduce the risk of fire or electric shock, 
DO NOT expose this device to rain or moisture.
DO NOT energise unless the front cover is in place.
This device must be earthed.
Installation, programming and maintenance must be carried out by qualified personnel.
Cooper Controls cannot accept responsibility for repairs or modifications that are not 
competently executed and in accordance with service or upgrade information.

CE compliant to all relevant standards

Summary of Contents for iLight UIG-2









Reviews: