12
Initial Start Up
Special Instructions
Before starting a vehicle always be seated in the driver’s seat, move the shift lever to
neutral, and set the parking brakes.
Before moving a vehicle, make sure you understand your shift pattern configuration. A
shift label should be in your vehicle’s cab. If not, refer to General Information to order one.
Procedure
1.
Make sure the shift lever is in neutral and the parking brakes are set.
2.
Turn on the key switch, start the engine.
3.
Allow the vehicle air pressure to build to the correct level. Refer to your “Operator
and Service Manual” supplied with the truck.
4.
Apply the service brakes.
5.
Make sure the range lever is down in the LO range position.
Range Lever MUST be down in the
LO Range position for LO range.
Operation
