Eaton EVT-300, Driver Instructions

Page: 12 / 34

9
Driver Display Indicators
Driver Display Indicators
Figure 5
Item Description
Green, Power On/
Driver’s Identification
Card Status* Illuminates after power is applied to the system
and the power-on self test (described on page
16) is complete. The green “ON” light may blink
continuously if the Driver’s Identification Card is
not installed, (the Driver ID Card is an optional
feature) and card alarm might be enabled*. (See
figure 5)
Volume Control* and
Power On/Off When pushed in until a distinctive click is heard
and/or felt, this turns the power on or off* if
enabled. Adjusts the volume of the Driver Dis-
play Unit speaker if enabled. Activates “Failure
Display Mode” when the knob is pressed in and
held for eight (8) seconds and then released.
(See Figure 5)
Speaker Located under the top cover of the Driver Dis-
play Unit. Sounds audible tones to alert the
driver of a possible hazard. May be set to limit
the volume to a minimum level*. (See Figure 5)
FAIL
ON S/C
Warning Level Range
Volume
Green, SmartCruise/Accident
Reconstruction
Light Sensor
Red
Orange
Yellow
Driver
Identification
Card Slot
Red, System
Failure
Green,
Power ON/
Driver Identification
Card Status
Volume Control
Power ON/OFF
Speaker
Range Control/
Accident Recorder
EATON VORAD