10
Driver Display Indicators
Range Control* and
Accident Recorder*
When rotated from minimum to maximum*, and
not in SmartCruise*, this control knob provides
range adjustment of the first alert (3 to 2 sec-
onds) and the second alert (2 to 1.75 seconds).
Function may be configured to prevent range
adjustment control* (See Figure 5). When
SmartCruise is selected, rotation of the knob,
from maximum to minimum, will change the fol-
lowing interval from 3.25 to 2.25 seconds. Acci-
dent Reconstruction is initiated by pushing and
holding this knob for 5 seconds thereby freezing
the most recent event data in half of the allo-
cated memory. (See “In Case of an Accident”
page 26) (See Figure 5)
Red, System Failure
Illuminates when a problem has been detected
in the forward looking radar system. A pattern of
flashes blink out the faults that are stored in
memory when activated by holding in the vol-
ume control knob for five seconds (See “Diag-
nostic Features”, page 27). (See Figure 5)
Green, SmartCruise*/
Accident Reconstruc-
tion*
Comes on when SmartCruise is enabled and
vehicle cruise control has been engaged. If Acci-
dent Reconstruction* has been initiated to store
information, it will flash 8 times. After system
power-up and power-on LED test is completed
and if Accident Reconstruction information was
previously stored, the display will flash 8 times.
(See Figure 5)
Light Sensor
Photo sensor senses ambient lighting and
adjusts intensity of the indicator lights accord-
ingly, i.e., increases brightness of indicator
lights in daytime and decreases brightness of
indicator lights during nighttime. (See Figure 5)
NOTE: Items marked with an asterisk (*) can be changed (configured), by a
Technician, by using ServiceRanger, a PC-based service support tool.
Summary of Contents for EVT-300
Page 33: ......
