![background image](http://html1.mh-extra.com/html/eaton/eclipse-series/eclipse-series_installation-and-operation-manual_3809834045.webp)
44
2. Press the
View
Enter
key before the start prompt times out,
View
Enter
Durant
the display will show rESU (resume) for two seconds, and the indicating LED
will flash.
To terminate a batch that has been stopped, simply reset the batch counter with the
reset key.
Variations of starting and stopping are possible due to external inputs and program-
ming. However, the method described above should be fairly common.
If the Eclipse has been programmed to autorecycle; that is, to deliver a batch, then
wait for a timeout period and start another batch, the message
will appear
briefly on the display each time a new batch is started. If the cycle setpoint is used to
stop delivery after a preset number of batches has been delivered, the message
will appear on the display after the number of batches is completed.
RUN MODE cont.
All manuals and user guides at all-guides.com