Eaton Small External Battery Cabinet (EBC-S)
and Large External Battery Cabinet (EBC-L)
User’s and Installation Guide
© Eaton Corporation plc 2015. All rights reserved.
Revision: 002
Document ID: P-164000504
11 (37)
2.1
Audience
The intended audience of this document is as follows:
•
People who plan and perform the installation of the UPS system
•
People who use the UPS system
This document provides guidelines for how to check the external battery
cabinet delivery and how to install and operate the cabinet.
The reader is expected to know the fundamentals of electricity, wiring,
electrical components and electrical schematic symbols. This document
is written for a global reader.
CAUTION
Read this document before you start to operate or perform work on
the UPS system.
2.2
CE marking
The product has a CE marking in compliance with the following
European directives:
•
LV Directive (Safety) 2006/95/EC
Declarations of conformity with UPS harmonized standards and
directives EN 62040-1 (Safety) is available at www.eaton.eu or by
contacting your nearest Eaton office or authorized partner.
2.3
User precautions
The only permitted user operation is to turn the battery circuit breaker
on or off.
Follow the precautions and only perform the described operations. Any
deviation from the instructions can be dangerous to the user or cause
accidental load loss.
.
DANGER
Do not open any screws in the unit. Failure to recognize the electrical
hazards can prove fatal.
Summary of Contents for EBC-L
Page 36: ......
