![background image](http://html1.mh-extra.com/html/eaton/eats30n/eats30n_installation-and-user-manual_4045445010.webp)
Page 10
ATS-00_EN
5.2 Communication card
N°
Indicator
Description
1
NETWORK port
Connects to the Ethernet Network
2
LOCAL port
Connects to a workstation with an RJ45 to DB9 cable to configure the
system.
3
RESET button
Resets InsightPower SNMP IPv6 for ATS (hereafter referred to as SNMP
IPv6). This does not affect the operation of the ATS
4
LED indicators
NET LED (green) indicates network communication status
ATS LED (yellow) indicates the ATS’s communication status.
5
DIP switch
Sets up operation mode
LED indicators
LED
Condition
Meaning
NET LED
OFF
Ethernet is unlinked.
NET LED
Green
Ethernet is linked.
ATS LED
OFF
1.
Initialization
2.
SNMP IPv6 abnormality
ATS LED
Amber
SNMP IPv6 abnormality
ATS LED
Blinking
Every second Poor connection between the ATS and the SNMP IPv6
Every 50 ms
Normal connection between the ATS and the SNMP IPv6
DIP switch
DIP 1
DIP 2
Operation mode
Description
OFF
OFF
Normal mode
The built-in SNMP IPv6 provides the ATS’s status
information and parameters through a network
system.
OFF
ON
Pass through
mode
The built-in SNMP IPv6 stops polling the ATS but
transfers the communication data between the
"LOCAL" port and the ATS.
ON
OFF
-
Invalid state
ON
ON
Configuration
mode
In this mode, users can login through the "LOCAL"
port and configure the built-in SNMP IPv6’s settings.
5. Operation