Eaton E5-648-C446 Series, Instruction Leaflet

Page: 5 / 24

5
Instruction leaflet IL05407001E
Effective October 2010
E5-648-C446x electronic preset
counter with four presets (relays)
LCD negative, red-green backlighting
eaton corporation
www.eaton.com
7.4 Selecting the menu items
The Prog/Mode key is used to select
a menu item within the sub-menu
7.5 Setting the menu items
The T2 key is used to select the individual
settings for the menu items
When setting count values, each decade
has a key assigned to it. Each time the key
is pressed, the value increments by one
7.6 Accepting the setting
Pressing the Prog/Mode key causes
the current setting to be accepted.
Programming then switches to the
next menu item
7.7 Ending the programming
During programming, it is possible to exit the programming
at each menu item by pressing the reset key.
Press the Reset key
The security prompt appears in the display
Pressing the Prog/Mode key acknowledges
this prompt and causes the programming
menu to start again from the beginning.
The previously programmed values are
preserved. These can now be changed
or checked again
Pressing the decade key T2 selects the
termination of the programming
The security prompt appears in the display
Pressing the Prog/Mode key
acknowledges this prompt and
terminates the programming; the modified
settings are saved in the EEPROM
The text SAVE is displayed for 2s
7.8 Programming menu
7.8.1 Default parameters
Three default parameter sets have been permanently stored;
these can be adapted as required. With each acknowledgment
of the parameter sets, all parameters will be reset to the values
listed in the table.
The dEFAuL P.USEr can be freely programmed.
Menu Parameter sets
Default setting
Parameter set 1
Default setting
Parameter set 2
Default setting
Parameter set 3
Freely programmable
User settings
7.8.2 Parameter sets
Factory settings are highlighted in grey
Display p.Set 1 p.Set 2 p.Set 3
Func Count Count Count
InP.PoL PnP PnP PnP
FiLtEr on oFF oFF
Count Cnt.dir uP.dn Quad
MPi LAtch LAtch Set
Loc.InP ProG ProG ProG
ModE Add Sub AddAr
FActor 01.0000 01.0000 01.0000
diViSo 01.0000 01.0000 01.0000
dP 0 0 0.00
SEtPt 000000 000000 0000.00
CoLor red.Grn red.Grn red.Grn
rESmd Man.EL Man.EL Man.EL
Pr.Out 1
t.Out 1
— 00.10 —
Pr.Out 2
t.Out 2
— 00.10 00.10
Pr.Out 3
t.Out 3
— 00.10 —
Pr.Out 4
t.Out 4
— 00.10 —