7
Operation
DPCT IOM InsTruCTIOn OPeraTIOn Manual
MN124018EN January 2023 www.eaton.com
4. Operation
4.1 General
This section specifically describes the operation and
functional use of the DPCT controller. The practical use
of and operation within each category will be discussed.
In this section, it is assumed that prior sections of this
manual were reviewed, and that the operator has a basic
understanding of the hardware.
4.2 Welcome screen
When the DPCT controller is first energized, the Welcome
Screen will be displayed (refer to section 4.2.1.1.)
While on the WELCOME SCREEN, the controller will
not start the pump regardless of any present starting
conditions; this screen will show all present starting
conditions. The screen comes equipped with a five (5)
minute countdown timer. When the timer expires the
controller will exit the WELCOME SCREEN and move to the
HOME tab screen and resume normal operation.
The three (3) buttons that appear on this screen are:
•
CLOSE AND DISABLE WELCOME SCREEN
•
CLOSE WELCOME SCREEN AND RUN ON
NEXT STARTUP
•
QUICK SETUP.
The operation is as follows:
Close and Disable Welcome Screen
–
when selected this
will take the user to the HOME tab screen. The next time
that the controller is re-energized the controller will not
show the WELCOME SCREEN.
Close Welcome Screen and Run On Next Startup –
when
selected this will take the user to the HOME tab screen.
The next time that the controller is re-energized the
controller will return to the WELCOME SCREEN.
Quick Setup –
when selected this will take the user directly
to the Quick Setup menu screen. On this screen the user
can program the Time, Date, Start Pressure, Stop Pressure,
Enable or Disable Automatic Shutdown, and Minimum
Run Timer. If the user chooses to accept or disregard the
programming from this menu, the user will be returned back
to the WELCOME SCREEN.
4.2.1 Welcome screen and home screen graphics
4.2.1.1. Welcome screen
Fig 1.
DPCT Welcome Screen
