3 Installation
3.1 Introduction
DB1 variable frequency drive
11/20 MN040031EN
Eaton.com
50
3 Installation
3.1 Introduction
This chapter provides a description of how to fit and how to connect the DB1
series variable frequency drive.
3.2 Mounting position
DB1 variable frequency drives have a compliant coating on their printed
circuit boards (coated boards). This provides enhanced protection from
moisture and contamination.
Without the required additional measures, using the device in the following
environments is strictly prohibited:
•
Explosion-proof areas
•
Environments with harmful substances:
•
Oils and acids
•
Gases and fumes
•
Dust
•
Radiation interference
•
Environments with mechanical vibration and impact loads that go
beyond the requirements in EN 61800-5-1.
•
Areas in which the variable frequency drive takes care of safety
functions required to guarantee machine and personnel protection.
￫
While installing and/or fitting the frequency inverter, cover all
ventilation slots in order to ensure that no foreign bodies can
enter the device.
￫
Perform all installation work only with the indicated, appropriate
tools and do not apply any force .
￫
For further information about how to install the DB1 variable
frequency drive in different frame sizes, please see the
IL040044ZU instruction leaflet.
