Intelligent Technologies (
IT.
) D77A I/O Module Products
MN05002001E
For more information visit: www.EatonElectrical.com
1
Introduction
Description
Cutler-Hammer
®
Intelligent Technologies (
IT.
) D77A I/O Modules from Eaton Corporation
®
are part of the
IT.
family of products that
are best by design. These modules are designed and built for industrial applications with standard features including removable
locking terminal blocks and connectivity to
IT
.
motor control. The size and features are a substantive engineering and marketing effort,
involving extensive customer input. For more information on the
IT
.
family of products, visit our website:
www.EatonElectrical.com
IT
.
D77A I/O discrete modules are available in 8 and 16 point densities, and in AC or DC voltage configurations. Input modules have
two points per isolated common. Output modules are available in relay and solid-state configurations with two points per isolated
common.
The
IT
.
D77A I/O analog modules are available in variable voltage and current loop modules. Input modules support four analog
channels and output modules support two analog channels.
D77A I/O products are designed for industrial applications, installed in a manner consistent with the guidelines outlined in this
document. They are designed for Pollution Degree 2 environments (clean and dry).
Component Characteristics
This section identifies special features engineered into the Cutler-Hammer
IT.
D77A I/O modules.
All Modules
The
IT.
D77A I/O modules have the following common features:
•
LED Status
— When the LED is illuminated the proper ON state signal is received at the input or at the output point.
•
Removable Lockable Terminals
— Terminals are easily removable for I/O module replacement and are lockable so they will not
vibrate loose. Terminals are available in screw type, cage clamp and insulation displacement.
•
Terminal Identification
— Each terminal is marked for ease of wiring and troubleshooting.
•
Isolation
— Each module is optically isolated between the field I/O and the backplane communication.
•
Securing Tabs
— Each I/O module has a locking mechanism to secure it to the DIN rail.
•
Barrier Type Terminals
— Each terminal has a barrier to minimize shorting of field wiring.
Discrete Input Modules
The
IT
.
D77A Input modules have the following common feature:
•
Adjustable Debounce
— Each point has adjustable debounce from 1 to 65 ms.
•
Sink/source
— Each DC input module has back-to-back LEDs in the optical isolating circuit that can accept sinking or sourcing
signals.
Discrete Output Modules
The
IT.
D77A I/O Output modules have the following common features:
•
Configurable Safe State
— Each output point has a loss of communication safe state setting.
•
Configurable Power ON State
— Each output point has a power-up setting.
Summary of Contents for D77A
Page 2: ......
