![background image](http://html2.mh-extra.com/html/eaton/cutler-hammer-rss-36-sd-st/cutler-hammer-rss-36-sd-st_installation-and-user-manual_4851811020.webp)
Intelligent Technologies Modbus to QCPort Adapter Manual
January 2006
MN05002002E (C)
For more information visit
www.eatonelectrical.com
Page 20
General Tab
Once a Modbus node or QCPort device is selected, the Properties Window will display
the attributes and parameters of that device. From this window, node/device parameters
can be viewed and modified. This information is also contained within the Property Pages
of the node/device that is being viewed by going to the toolbar and selecting View and
then Property Pages (Shift + F4).
The parameters such as the IP address, address mode and other D77D-EMA parameters
can be directly modified. It is also possible to “drill” down into the QCPort channels to
configure the QCPort devices once an IP address has been set on the D77D-EMA. The
general tab will provide the ability to set a static IP address or assign the IP address
using BootP and set the other network parameters.
Table 18 General Tab