![background image](http://html2.mh-extra.com/html/eaton/cutler-hammer-rss-36-sd-st/cutler-hammer-rss-36-sd-st_installation-and-user-manual_4851811018.webp)
Intelligent Technologies Modbus to QCPort Adapter Manual
January 2006
MN05002002E (C)
For more information visit
www.eatonelectrical.com
Page 18
Configuration Using CH Studio
CH Studio Component Manager
Pressing the Auto Configuration button performs a basic setup of the D77D-EMA and
connected devices that is sufficient for most applications. When an application requires
that parameters have to be modified from default, use CH Studio Component Manager.
The CH Studio tool is used for configuration, maintenance and monitoring of Eaton
Electrical nodes and QCPort devices. After going on-line, using CH Studio, the Studio
Explorer will display the Eaton Electrical nodes on Modbus and allow the user to “drill”
down through the D77D-EMA to view and configure the QCPort devices.
Part of the setup of the TCP/IP network is to select the range of temporary IP address to
assign devices and the setup of the subnet mask and default gateway. For most users,
these settings will not need to be modified from default since CH Studio using current
network settings to preconfigure the TCP/IP network settings. Once these parameters
are setup, pressing the Go Online button will allow CH Studio to search for Eaton
Electrical nodes on Modbus TCP.
Table 16 TCP/IP Setup