Eaton Cutler Hammer PowerXL DC1 E1 Series, Parameter Manual

Page: 20 / 50

3 Control signal terminals
3.2 Configuration of the control signal terminals
16
DC1…E1 Variable Frequency Drives 11/16 MN040022EN www.eaton.com
3.2 Configuration of the control signal terminals
3.2.1 P-12 = 0: Terminal-based operation
Table 9: P-12 = 0: Terminal-based operation
The setpoint and the control commands are set/issued via terminals.
P-15 DI1
(terminal 2) DI2
(terminal 3) DI3/AI2
(terminal 4) DI4/AI1
(terminal 6)
0 START DIR Select AI1 REF/f-Fix1 AI1 REF
1 FWD Select AI1 REF/f-Fix Select f-Fix Bit0 AI1 REF
2 FWD Select f-Fix Bit0 Select f-Fix Bit1 Select f-Fix/f-max
3 FWD Select AI1 REF/f-Fix1 EXTFLT AI1 REF
4 FWD Select AI1 REF/AI2 REF AI2 REF AI1 REF
5 FWD REV Select AI1 REF/f-Fix1 AI1 REF
6 START DIR EXTFLT AI1 REF
7 FWD REV EXTFLT AI1 REF
8 START DIR Select f-Fix Bit0 Select f-Fix Bit1
9 FWD REV Select f-Fix Bit0 Select f-Fix Bit1
10 Pulse FWD (NO) Pulse STOP (NC) Select AI1 REF/f-Fix1 AI1 REF
11 Pulse FWD (NO) Pulse STOP (NC) Pulse REV (NO) AI1 REF
12 FWD Select t-dec/t-QuickDec Select AI1 REF/f-Fix1 AI1 REF
13 FWD Select f-Fix Bit0 EXTFLT Select f-Fix Bit1
14 Pulse FWD (NO) Pulse STOP (NC) Pulse REV (NO) Select DIG REF/f-Fix1
15 FWD Select f-Fix4/AI1 REF Select Fire Mode/Normal OP AI1 REF
16 FWD Select f-Fix4/f-Fix2 Select Fire Mode/Normal OP DIR
17 FWD Select f-Fix Bit0 Select Fire Mode/Normal OP Select f-Fix Bit1