Lubrication
4
Lubrication Specifications
Note:
For a list of Eaton Approved Synthetic Lubricants, see TCMT-0021 the list of approved lubricants and TCMT-0021 the list of
lube intervals, or call 1-800-826-HELP (4357). Recommended lubricants for the 2-A-92 are currently the E500 and the E250,
which list a mileage, a year, and a hour change interval.
Note:
The use of lubricants not meeting these requirements will affect warranty coverage.
Note:
Additives and friction modifiers must not be introduced.
Note:
Never mix engine oils and gear oils in the same transmission.
Buy from a reputable dealer
For a complete list of approved and reputable dealers, write to: Eaton Corporation, Worldwide Marketing Services, P.O. Box 4013,
Kalamazoo, MI 49003
Transmission Operating Angles
If the transmission operating angle is more than 12 degrees, improper lubrication will occur. The operating angle is the transmis-
sion mounting angle in the chassis plus the percent of upgrade (expressed in degrees). For operating angles over 12 degrees, the
transmission must be equipped with an oil pump or cooler kit to insure proper lubrication.
Mixing of Oil Types
CAUTION:
Never mix engine oils & gear oils in the same transmission.
Engine oils and gear oils may not be compatible; mixing can cause breakdown of the lubricant and affect component performance.
When switching between types of lubricants, all areas of each affected component must be thoroughly flushed.
Operating Temperature
Oil Coolers
Kit K-1702 includes the pump, cooler and accesories to convert the AT-1202.
