Specifications
1
Gen
e
ra
l Inf
o
rm
at
ion
Warnings and Precautions
Before starting a vehicle always be seated in the driver’s seat, place the transmission in neutral, set the parking brakes and
disengage the clutch.
Before working on a vehicle place the transmission in neutral, set the parking brakes and block the wheels.
Before towing the vehicle place the transmission in neutral, and lift the rear wheels off the ground, remove the axle shafts,
or disconnect the driveline to avoid damage to the transmission during towing.
The description and specifications contained in this service publication are current at the time of printing.
Eaton Corporation reserves the right to discontinue or modify its models and/or procedures and to change specifications at any
time without notice.
Any reference to brand name in this publication is made as an example of the types of tools and materials recommended for use
and should not be considered an endorsement. Equivalents may be used.
This symbol is used throughout this manual to call attention to procedures where carelessness or failure to follow
specific instructions may result in personal injury and/or component damage.
Departure from the instructions, choice of tools, materials and recommended parts mentioned in this publication may jeopardize
the personal safety of the service technician or vehicle operator.
Warning:
Failure to follow indicated procedures creates a high risk of personal injury to the servicing technician.
Caution:
Failure to follow indicated procedures may cause component damage or malfunction.
Note:
Additional service information not covered in the service procedures.
Tip:
Helpful removal and installation procedures to aid in the service of this unit.
Always use genuine Eaton replacement parts.
