background image

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

© 2011 Eaton Corporation

All Rights Reserved

Printed in USA

Publication No. IL15560C / TBG000672

Part No. 69C0686H01

August 2011

Eaton is a registered trademark of Eaton Corporation. 

All other trademarks are property of their respective 

owners.

Instruction Leaflet 

IL15560C

Effective August 2011

AB De-ion® Circuit Breaker

Type PB-DC (Mag. Only)

 

The instructions for installation, testing, maintenance, or repair herein are provided for 

the use of the product in general commercial applications and may not be appropriate for 

use in nuclear applications . Additional instructions may be available upon specific request 

to replace, amend, or supplement these instructions to qualify them for use with the 

product in safety-related applications in a nuclear facility .
This Instruction Booklet is published solely for information purposes and should not be 

considered all-inclusive . If further information is required, you should consult an autho-

rized Eaton sales representative .
The sale of the product shown in this literature is subject to the terms and conditions 

outlined in appropriate Eaton selling policies or other contractual agreement between the 

parties . This literature is not intended to and does not enlarge or add to any such con-

tract . The sole source governing the rights and remedies of any purchaser of this equip-

ment is the contract between the purchaser and Eaton .

NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF 

FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OR WARRANTIES 

ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, ARE MADE 

REGARDING THE INFORMATION, RECOMMENDATIONS, AND DESCRIPTIONS 

CONTAINED HEREIN.

 

In no event will Eaton be responsible to the purchaser or user in contract, in tort (includ-

ing negligence), strict liability or otherwise for any special, indirect, incidental or conse-

quential damage or loss whatsoever, including but not limited to damage or loss of use 

of equipment, plant or power system, cost of capital, loss of power, additional expenses 

in the use of existing power facilities, or claims against the purchaser or user by its 

customers resulting from the use of the information, recommendations and description 

contained herein .

Summary of Contents for AB De-ion









Reviews: