INSTALLATION
Eaton 9910 UPS and EBM Installation Guide (6000 VA Models)
S
P-164000007 Rev 1
25
14.
Align the rear hold down brackets on the sides of the UPS or EBM
with the inner rails. Carefully slide the UPS or EBM into the rack
cabinet. See Figure 11.
OK
100%
6
min
150
0VA
208V/60h
z
UPS ON
Rear
hold down
bracket
Figure 11. Installing the Cabinet in the Rack
15.
Secure the front of the UPS or EBM to the rack cabinet with four
M5
16 mm screws, as shown in Figure 11.
16.
If the rack cabinet has conductors for grounding or bonding of
ungrounded metal parts, connect the ground cable (purchased
separately) to the ground bonding screw on the rear of the UPS or
EBM.
17.
If you are installing a UPS, continue to Step 18. If you are installing
an EBM, skip to Step 27.
18.
Carefully slide one battery module into the UPS. Repeat for the
second battery.