Ancillary Service Connections
Condensate Removal
As standard the condensate is removed by gravity drainage. The drains are run in two off flexible hoses (one off per drain tray) which
are run to the outside of the unit and joined with a ‘Y’ connector, which is housed within the connection of the unit.
Condensate Connection
When using gravity drainage connect the flexible hose onto 15mm copper or similar and secure using a jubilee clip or similar. Ensure
the clip is not over tightened such that it cuts the flexible hose.
SPECIAL NOTES :
ENSURE ALL CONNECTIONS EXTERNAL TO THE UNIT CASING AND DRAIN PIPEWORK IS ADEQUATELY
INSULATED TO PREVENT FREEZING OR CONDENSATION.
Eaton-Williams
Low Temperature DX Cassette
Page 14
QLC/ICU
Document 0412124
Issue 2.1 05/06
