QUICK START GUIDE
３
|
P a g e
3
UNPACKING AND INSTALLATION
1. Open the packing box and check if it is sealed.
2. Unwrap the packing box to take out the manual
and check if the accessories are complete.
3 Take out the top accessory box and then take out
3DPrinter. Remove all packing foam and put printer on a
level table.
Use side panels to lift the Printer from the
Box.
.
4. Take the Locker out
5. Tear the Sticky paper out on the Platform
6. Put the
Glass-reinforced epoxy laminate sheet
into the platform
7.Fix the material holder onto the back of 3D printer. Take
out the printing Filament and hang them on the material
rest.
8. Put the material through the Teflon hose.
Rocker arm
Teflon hose
