The EasyThreed WATERCUBE Quick Start Manual is a comprehensive guide designed to assist you in setting up and operating your WATERCUBE 3D printer effortlessly. With step-by-step instructions and clear illustrations, this manual is available to download for free from manualshive.com, enabling you to get started with your printer in no time.
QUICK START GUIDE
４
|
P a g e
4
INTRODUCTION OF STARTING UP THE PRINTER
4.1
Power On
Plug the power cord -> Insert SD card -> Power Switch on. The 3D printer starts up, as follows,
Touch LCD Display, goes to operation page, click setup, it comes the following.
Click Auto calibration, goes to auto calibration page, operate per instruction, click back after operation completed.
