Foot Straps
PNG30030
Secure Foot
Straps
PNG30031
Airline Buckle
Hip Belt
PNG30028
Velcro Hip Belt
PNG30029
Cane Back
16”Wx21”H
PNG50492
Cane Back
18”Wx21”H
PNG50493
To assemble the cane back option,
slide the back assembly into the seat
assembly as shown. Tighten securely
with bolts provided.
Recommended separation distances between
portable and mobile RF communications equipment and the EasyStand Glider
The EasyStand Glider is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the EasyStand Glider can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
EasyStand Glider as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
150 kHz to 80 MHz
80 MHz to 800 MHz
800 MHz to 2 .5 GHz
Separation distance according to frequency of transmitter
d = 1.2
√
P
m
d = 1.2
√
P
d = 2.3
√
P
.12
.12
.23
.38
.38
.73
1.2
1.2
2.3
3.8
3.8
7.3
12
12
23
W
0.01
0.1
1
10
100
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
FIG . 12
!
Activating the Mechanical Emergency Release
All Altimate Medical electric lift products are equipped with a
mechanical release to be used in emergency situations.
CAUTION: Using the emergency mechanical release as the
primary means to return to the seated position can cause
damage to the unit. Only use the mechanical release in
emergency situations.
FIG . 12- The release allows the user to be lowered to a
seated position in the unlikely occurrence of the battery
losing charge while the user is in a standing position. The
actuator only retracts if the release is pulled and there
is weight on the seat. The release is located on the left
side of the seat and is signified by a red tag with the word
“EMERGENCY.”
1. To activate the emergency mechanical release pull out the
quick release pin located on the left side of the seat.
2. Squeeze the handle and if necessary, push down on the
seat.
Page 15 - Pow’r Up Lift Option
Option Assembly - Page 8
