manualshive.com logo in svg

EasyStand Evolv, Owner'S Manual

Share
Download
EasyStand Evolv Owner'S Manual Download Page 12

page 9  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                               

Shadow Tray Assembly

Shadow Tray Assembly

Shadow Tray Bracket Set-up

 

®

FIG . 10- 

On the support arm, remove the plastic 

bag with two mounting bolts and a silver pin. 

Using a hex wrench, remove the end cap from 

the Shadow Tray arm.

End Cap

FIG . 11- 

Release the plunger by pulling it down, 

twist to keep it released.

FIG . 12- 

Insert the silver pin into the support arm as 

shown, while supporting the silver pin, place the support 

arm into the Shadow Tray bracket until it clicks into place.

Silver Pin

Shadow Tray Bracket

Support Arm

FIG . 13- 

The knobs on the end of the support arm should 

be exposed. Rotate the arm down to 90˚. Lock the plunger 

into place.

Knobs

FIG . 14- 

Use a rubber mallet to tap the black cap into the 

Shadow Tray bracket. Re place the end cap and tighten 

securely.

These assembly instructions are 

shown for the right side mounted 

Shadow Tray, for the left side 

mounted Shadow Tray, installation 

will be on the opposite side .

Summary of Contents for Evolv













































Reviews:

No comments

Brands by name

Popular brands

Load more brands