page 31
page 8
Swing-Away Front Assembly
FIG . 7- Insert the H-frame into the front caster frame. Insert
pins into the holes provided (crossbar should face seat).
If the Front Swivel Casters were ordered refer to p. 24.
If the Independent Kneepads were ordered refer to p. 25.
FIG . 8- Place the kneepad bracket onto the H-frame. Remove
the three bolts from the kneepad making sure the plastic
insert stays in place. Place the kneepad onto the bracket
and insert the top two bolts before inserting the middle bolt.
Tighten securely.
If the Shadow Tray was ordered, skip to p. 9.
FIG . 9- Insert the tray frame into the H-frame, tighten knobs
securely. Place the tray onto the tray frame, install knobs.
Tighten nuts securely.
Note: Tray will not move if nuts are overtightened.
To use the Swing-Away Front:
To swing away the front for transferring, remove pull pins
from the bottom of the H-frame. Lift collar and swing away.
After positioning client in stander, swing front back into
front caster frame and replace pins, making sure the collar is
secure.
Caution: Collar and pins must be securely in place before the
user transitions into the standing position.
For Evolv adjustments, see p . 27 .
FIG. 8
FIG. 9
!
