easyRAID Q16PS-F4R3, Hardware User Manual

Page: 27 / 30

easyRAID Q16PS-F4R3 SAS Disk Array Systems
17
3
M
ain
te
na
n
ce –
Up
gr
a
din
g Me
m
or
y
Upgrading Memory
The disk array system takes a single DDRII DIMM with a maximum capacity of 2 GB.
Follow these instructions to upgrade the memory.
1 Loosen the screws holding the controller cage in place, slide the controller-cage
out of the chassis.
2 Pull the DIMM retaining clips away from the DIMM; the DIMM springs out of the
socket. Remove the DIMM.
3 Gently push the new DIMM into the socket, then push the corners of the DIMM
down. The DIMM is secured by the DIMM retaining clips. Push the controller
cage back in, lower the handle, and tighten the retaining screws.
Note
The DIMM module will fit in only one direction. Do not force the
DIMM into place.
COM
UPS
COM
UPS