easyRAID Q16PS-F4R3, Hardware User Manual

Page: 23 / 30

easyRAID Q16PS-F4R3 SAS Disk Array Systems
13
2
Ba
sic Co
nfigu
ra
tio
n –
M
oun
ting in a Rack
Mounting in a Rack
When the disk array system is completely set up, it can be installed in a standard 19-
inch rack. Follow the instructions in this section to install the disk array system in a rack.
1 Clip eight rack nuts supplied with your rack, into the rack, taking care that they
correspond with the mounting points on the rails.
2 Extend both of the rails so that they are the right length to fit in your rack.
3 Bolt the rails into the rack using the rack bolts supplied with your rack.
You will need four nuts and bolts (not included) for each rail; two at the front
and two at the back.
4 Tighten the locking screws when they are the correct length.
5 Slide the disk array system into the rack and bolt it into place with the supplied
fixing screws.
Caution
This product is heavy. Attempting to install the disk array system in a
rack by yourself could result in injury or damage to the product.