EASYLOOK ES10-01, Operation Manual

Page: 36 / 76

31 Easylook Video Assist Operation Manual
Easylook Video Assist Operation Manual
OR STOP TO ESCAPE
Pressing the ( D ) key toggles between
LOW RES 10:1
and
HIGH RES 5:1
as shown in the data display. If your desired recording quality is displayed hit the ( I ) key to
store your new setting and to leave the setup menu.
4.6 Delete the last Take
To erase the last recorded take press the ( I ) + ( D ) keys simultaneously on the keypad.
The data display reads:
DELETE LAST TAKE ?
PRESS RECORD TO CONFIRM
OR STOP TO ESCAPE
If you like to delete the last take press the ( X ) key. To cancel this operation press the (
I ) key.
4.7 Delete all Takes
To erase all takes on the hard disk (erase hard disk) press the ( I ) + ( C ) keys
simultaneously on the keypad. The data display reads:
DELETE ALL FILES ?
PRESS RECORD TO CONFIRM
OR STOP TO ESCAPE
If you like to erase your hard disk press the ( D ) key. To cancel this operation press the
( I ) key. This might take up to 45 seconds.
4.8 Line Mode
To select the VIDEO IN connector as the video input for the video signal provided by the video source
press the ( I ) + ( N ) keys simultaneously. The green LED in the ( N ) key lights up and
indicates line mode operation.
è
It is recommend to always connect through an Easylook video transmitter (ES1S-01 or ES1S-