EASYLOOK ES10-01, Operation Manual

Page: 23 / 76

18 The System
Easylook Video Assist Operation Manual
3.6.1 Brightness Control
Use this control ( S ) to adjust the brightness of the onboard TFT screen.
3.6.2 Contrast Control
Use this control ( T ) to adjust the contrast of the onboard TFT screen.
3.6.3 Color Saturation Control
Use this control ( U ) to adjust the color of the onboard TFT screen.
3.6.4 Mirror TFT display
Press the ( A ) key to mirror the picture on the onboard TFT display horizontal.
Press the ( B ) key to mirror the picture on the onboard TFT display vertical.
3.6.5 4:3 / 16:9 change
Pressing the ( R ) key toggles the aspect ratio of the onboard TFT display between 4:3 and
16:9. In 16:9 mode the TFT will show a larger image, without the 16:9 letterbox bars. This is useful
when your project is filmed in 16:9 and the video signal provided is letterboxed.
è All adjustments done the onboard TFT display, will not show on any external monitor connected
to VIDEO OUT connector . To adjust the picture of any external monitor use the controls on that
monitor. (for more information, see VIDEO OUT)
3.6.6 Color Bar
Pressing the ( Q ) key displays a color bar test pattern on the internal TFT display and on any
connected external monitors. This very useful to adjust your displays. Press the key ( Q ) again
to switch off the test pattern.