EASYLOOK ES10-01, Operation Manual, Page: 15 / 76

10 Quickstart
Easylook Video Assist Operation Manual
2.1.2 Hard Disk Installation
Unless no already done, it is necessary to insert the hard disk ES01A-03 into the Easylook Video
Assist unit. Make sure the Easylook Video Assist is turned off. (for more information, see
ON/OFF )
Push the hard disk compartment cover ( IX. ) towards the front of the Easylook Video Assist and take
it off. Insert a hard disk ES01A-03 (green side up) and push it in firmly. Close hard disk compartment
by sliding the cover back on. To change or take out the hard disk ES01A-03, turn off the Easylook
Video Assist, open the hard disk compartment and pull out the hard disk out, using the little lever.
è Unless not already done, it is necessary to format a new hard disk before the first use. (for
more information, see Hard Disk Formatting)