EasyIO FT Series – User Reference v1.0
13
Network and Wireless
EasyIO FT series comes with on board wireless connection.
The wireless network comply to IEEE 802.11 standards.
It supports IEEE 802.11 b/g/n standard.
Each unit is supplied on board internal antenna.
FT Series is Wi-Fi Access Point (AP).
The AP connection is used to configure the FT controller.
Access Point SSID : FT-xxxxxx , where xxxxxx is the last 6 digit of the MAC address.
Mac Address label located at the bottom casing of each FT series controller.
The MAC address label is available below circuit board as well
Password for FT-xxxxxx SSID by default is
12345678
.
** Please change the password to secure the connection**
In the example above, the MAC address is
38:D6:20:00:00:00,
you should able to scan the SSID as
FT-000000
from any Wi-Fi Scanner.
Image below shows a Wi-Fi scanner from a Windows Operating system.
