Easycar E8-B, Installation Manual

Page: 3 / 13

4
INSTALLATION GUIDE
5
INSTALLATION GUIDE
U S A U S A
1. Wire Connection Guides
➢

Heavy Gauge, 10-pin Connector (CN1)
There are 6 heavy gauge wires coming from the large 6-pin connector. They are
used to energize the ignition circuits in the vehicle. It is crucial to ensure that these
connections are capable of handling the current demands. For this reason, Scotch-
Locks, T-taps and other such connectors are strongly discouraged.
CN1/1
YELLOW STARTER OUTPUT
After cutting the starter wire, connect the YELLOW wire to the ignition switch wire.
This wire supplies power to the starter motor output.
CN1/2
WHITE (+) IGNITION 2
This wire is the polarity feed for the ignition 2. (+) 12V with the key ON and 0V in
the START position. This wire supplies power to subsidiary accessories such as car
audio, lights and to climate control such as air conditioner and heater. If the vehicle
is not equipped with this wire, do not connect it.
CN1/3
GREEN (+) IGNITION 1 INPUT/OUTPUT
Search for a 0 volt wire with the key in the ACC position, (+) 12V wire with the key on
the ON position, and (+) 12V wire with the key on the START position.
CN1/4
RED/WHITE (+) MAIN POWER 2
Connect to constant (+) 12V source, minimum 30A capacity.
CN1/5
BLUE (+) ACC
Search for a wire that is 0V with the key in the OFF position, (+) 12V with the key on
the ACC & ON position, and 0V with the key on the START position.
CN1/6
RED (+) MAIN POWER 1
Connect to constant (+) 12V source, minimum 30A capacity.
Before Beginning the Installation
• Please read this entire installation guide before beginning the installation.
The installation of this push button remote start system requires interfacing with
many of the vehicle’s systems. Many new vehicles use low-voltage or multiplexed
systems that can be damaged by low resistance testing devices, such as test lights
and logic probes (computer safe test lights). Test all circuits with a high quality digital
multi-meter before making connections.
• Do not disconnect the battery if the vehicle has an anti-theft-coded radio.
If equipped with an air bag, avoid disconnecting the battery if possible. Many airbag
systems display a diagnostic code through their warning lights after they lose power.
Disconnecting the battery requires this code to be erased, which can require a trip to
the dealer.
• Roll down a window to avoid being locked out of the car.