Preparing the appliance
16
Preparing the appliance
− Remove all packaging material and protective stickers from the appliance and
accessories, especially from the contacts on the rear of the handheld vacuum
cleaner.
− Place the holder
20
in the base
16
until you hear it latch into place.
Charging the battery
You can charge your fl oor vacuum cleaner with the power adapter and charging
station provided.
− Switch the fl oor vacuum cleaner off before charging it.
To charge the fl oor vacuum cleaner, the handheld vacuum cleaner
6
must be latched into the housing of the fl oor vacuum cleaner.
− Connect the power adapter to the charging station
16
by plugging the hollow
plug into the connecting socket
17
on the bottom of the charging station.
NOTICE!
Risk of damage!
Improperly routing the cord can lead to cord breaks and defects in
the power adapter.
− Guide the cord through the cord duct on the bottom of the
charging station and then to the recess on the rear and then
out of the base.
− Place the fl oor vacuum cleaner
4
with the handheld vacuum cleaner in the
charging station. Make sure the fl oor vacuum cleaner is upright and that the
latching groove
12
engages in the latching spring
21
of the charging station.
− Connect the power adapter to the socket.
The charge indicator lights red. The charge indicator lights blue as soon as the
battery is fully charged.
− Once fully charged, pull the plug of the power supply unit out of the socket again
and remove the jack plug from the charging station.
IMA MD18418 Content V2.4.indd 16
IMA MD18418 Content V2.4.indd 16
25.07.2019 12:52:58
25.07.2019 12:52:58
