Care and storage
USA
AFTER SALES SUPPORT
16
USA
1-866-558-8096
Remote controlled wall sockets
• radiation of antennas associated with the distance between transmitters or
receivers and conductive surfaces or objects (including the human body or
ground)
• broad-band disruptions in urban environments that reduce the signal-
to-noise ratio; the signal is not recognized in case of such “noise”
• radiation of insufficiently shielded electronic devices, e.g. openly operated
computers or similar
The effectively achievable distance between the transmitter and receiver in
normal operation depends on the installation location and environment.
Generally, proper operation of all components without problems with respect
to the receipt of wireless signals should be possible.
Under certain circumstances, problems with wireless communication between
the receiver and transmitter may occur and you will not be able to switch the
remote controlled wall sockets on or off.
− In this case, pull the remote controlled wall socket out of the permanently
installed socket and insert it again.
Care and storage
Cleaning the remote controlled wall sockets
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Never submerge the remote controlled wall sockets in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk of damage!
Using unsuitable cleaners could damage the surface of the
remote controlled wall sockets and the remote control.
− Do not use any aggressive cleaners, sharp or metallic
cleaning utensils such as brushes with metal or nylon
bristles.
− Do not use any solvents or abrasives.
Korrektur
munica
ica
be able to sw
ble to
cket out of the p
ket out of the
ontrolled w
trolled w
o
cuit!
cuit!
s penetrated
s penetrated
mer
mer
ge the
ge the
hat no
hat n
