AFTER SALES SUPPORT
USA
Preparation
11
USA
1-866-558-8096
Remote controlled wall sockets
Preparation
Checking the remote controlled wall sockets and the
product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with
a sharp knife or other pointy object, you may damage the
remote controlled wall sockets.
− Be very careful when opening.
1. Take the remote controlled wall sockets out of the packaging and check
whether the remote controlled wall sockets or the individual parts exhibit
damages. If this is the case, do not use the remote controlled wall sockets.
Contact the manufacturer at the service number specified on the warranty
card.
2. Check to make sure that the product is complete (see
Fig. A
).
Inserting⁄changing batteries
1. Push the battery compartment cover in the direction of the arrow
to open it (see
Fig. B
).
2. If necessary, clean the contacts of the battery and the battery
compartment
12
.
3. Insert the enclosed battery or a battery of the same type (A23/12 V) in the
battery compartment. Be absolutely sure to take note of the polarity.
4. Slide the battery compartment cover back onto the battery compartment.
Selecting a location
WARNING!
Risk of electric shock and damage!
A faulty electrical installation or excessive line voltage may
result in an electric shock.
ma
out of the packa
t of the packa
ockets or the ind
ets or the ind
use the remote
use the remote
e service numbe
vice numbe
he product is co
product is c
ging batter
ng batte
compartment c
mpartment c
Fig. B
Fig. B
).
).
ry, clean the con
, clean the con
tment
tment
Ko
12
.
.
enclosed
enclosed
part
part
