www.easy2access.net
Easy2Access A/S
®
EASY-908 Pin Code lock
26
will send out a wireless signal to disarm the alarm system (if such is also
installed).
Opening the lock with key
Opening with a lock is designed only for emergency solutions and must not
be used on a daily basis.
The key is turned ¼ from vertical to horizontal position. Turn the key back to
starting position after opening the door and the door is locked again.
Important
•
When a resistance is felt it is important to stop, the cylinder can become
damaged if continuing.
•
If the door is opened with a key, the door must be locked with the key
again in order for the electronic to function.
8.
Inside Unit Programming
Only one set PIN code can be added on the inside unit. The Set number of
this PIN code is 1.
▲
Normally the inside handle stays in unlock position.
Adding the PIN code
A.
Enter
﹡
﹡
﹡
﹡
＋
＋
＋
＋
123
＋
＋
＋
＋
﹡
﹡
﹡
﹡
(with the Green LED blinking
)
＋
＋
＋
＋
New PIN code
＋
＋
＋
＋
﹡
﹡
﹡
﹡
（
with the Green LED blinking
）＋
＋
＋
＋
New PIN code again
＋
＋
＋
＋
﹡
﹡
﹡
﹡
.
When
the Green LED blinks again and one long beep is heard, the operation
succeeds.
▲
Important Notes:
The PIN code on the Inside Unit is an individual code
and will remain unchanged no matter how the PIN codes on the outside unit
are changed.
9.
Resetting the lock
Resetting the lock can only be performed by an authorized installer. It is
therefore of utmost importance that you remember your master codes,
which can add and delete all codes. Should you have forgotten the codes
