www.easy2access.net
Easy2Access A/S
®
EASY-908 Pin Code lock
23
freely, see the trouble shooting table below for possible solutions. If the
handles turn freely, continue with the next step.
4.
Make sure you selected the appropriate rubber gasket for the outside
unit.
5.
Close the door and enter the factory-set PIN code to check if the motor
moves smoothly or not. If yes, turn down the outside handle to see if it
can unlock the door or not. If not, view the trouble shooting part of the
manual below to find the possible solution.
6.
Make sure the master codes are stored in a safe place; they are the only
codes that can add and delete other codes.
6.
Outside Unit Programming
Adding PIN codes
There can be TEN sets individual PIN codes set from the outside unit. The
Set id number ranges from 0 to 9. The first two pin codes are master codes.
The original factory-set system PIN Code is
123
. The PIN code can be 1 digit
up to 10 digits.
Record the id numbers with each code in order to easily delete pin codes in
the future.
A.
ADD
the first Master PIN code
：
Enter
*0 + 123 + *(Green LED
blinks) + New PIN code + *(Green LED blinks) + New PIN code
again + *
When the green LED blinks and one long beep is heard, the operation
has succeeded; if the Red LED blinks, the operation failed.
B.
ADD
the second Master PIN code
：
Enter
*1 + the first master
PIN code + *(Green LED blinks) + New PIN code + * (Green
LED blinks) + New PIN code again + *
When the green LED blinks and one long beep is heard, the operation
succeeds; if the Red LED blinks, the operation fails.
C.
ADD
the User PIN code
：
Enter
*2~9 + one of the master PIN
codes + *(Green LED blinks) + New PIN code + * (Green LED
blinks) + New PIN code again + *
When the green LED blinks and one long beep is heard, the operation
succeeds; if the Red LED blinks, the operation fails.
Notes: 1.“+”is only a follow-up mark, not a functional button.
