background image

 

 

then the ward terminal will automatically call back to the mobile phone of the 
guardian and the guardian may hear the sound of the surroundings within 10m 
around the ward.   
SMS format: 5550000 
Remarks: 0000 is the initial defaulted password and in practice the password 
could be set by the user. 
 

7. Regular Upload Interval Setup 

The defaulted upload interval of this product is 0, meaning that the defaulted 
GPRS  is  closed.  The  user  may  change  the  parameter  according  to  actual 
demand. 
Command  format:  #  730#  Sampling  interval  #  Pieces  of  uploads  #  User 
password ## 
Example: #730#20#4#0000## 
Notes

: The parameter “20” indicates getting one point every 20s; after getting 

points accumulatively for 4 times, upload one piece of positioning information 
with the upload interval as 20*4=80s. The user may change this parameter as 
the case may be.     
 

8. Function of Changing Password 

Send the SMS “#770# User new password # User old password ##” by mobile 
phone to the terminal number, after successful sending, the mobile phone with 
such  setup  will  receive  one  piece  of 

‘&770&successful  setting&&’  response 

information 

or ‘&770&PASSWORD ER&&’ if the password is wrong, as shown 

in the following picture:   
 

9. Set User name Command   

SMS Command Format: #801#4~20-digit letters or numbers #4-digit password 
## 
Example: #801#13900139000#0000## 
Notes: After executing this command, the user name of the terminal on GPRS 
mode is required to be set up according to actual demand. After the setup is 
successful,  the  terminal  will  send 

reply  with  ‘&801&successful  setting&&’  or 

‘&801&PASSWORD ER&&’ if the password is wrong. 
 

10. Set APN Command   

Create the SMS “802#APN letters or digits, 4-32 bits # Log user name letters 
or  digits  4-32  bits  in  #  Log  password  letter  or  digits  4-32  bits  in  #  terminal 
password 4 bits ##” and send it to the terminal; after executing this command, 
the terminal will automatically restart and connect to GPRS with APN set. 
Command example 1: #802#cmnet###0000### 
Command example 2: #802#internet#guest#a1234#0000## 
#802#zap.vivo.com.br#vivo#vivo#0000## 
 

Summary of Contents for Gps watch









Reviews: