To order parts and supplies: 800.343.9353 >> eastwood.com
5
FIG. 2
OPERATION
• Center and place a 3” Hook
and Loop Sanding Disc (not
included) onto the face of the
Backing Pad.
• Connect air supply, move
Speed Control located at the
upper rear of the housing to
the desired speed setting (left
to decrease, right to increase)
and depress trigger to begin
rotating action.
(FIG 2)
. Speed
is regulated by pressure ap-
plied to the trigger.
MAINTENANCE
• Add several drops of air tool
oil before each use by drop-
ping directly into the air inlet.
• If tool is to be unused for
an extended period, add 10
drops of air tool oil directly
to the air inlet, rotate the tool
motor by hand several times
to distribute the oil throughout
the motor and gearbox then
store the tool, handle up.
Decrease Increase