To order parts and supplies: 800.345.1178 >> eastwood.com
7
REPLACE OUTER SHIELD
1.
Using a straight-blade
screwdriver, pry the two
Lens Peg Retaining Clips
outward then remove Pegs
and Outer Shield from
Helmet.
(FIGS 2 & 3)
.
2.
Reverse to install while
noting irregular shape of the
Pegs and location of short
tabs on ends of Shield.
REPLACE INNER SHIELD
1.
Place the Helmet face-down
on a soft surface and grip
the lower edge of the Inner
Shield with a fingernail, pull
inward curling the Inner
Shield inward and remove
(FIG 4)
.
2.
Reverse to install making
sure to slip the side edges of
Shield under the four tabs of
frame
(FIG 4)
.
FIG. 2
FIG. 3
FIG. 4
Peg
Clip
✓
✓
✓
Inner Lens
✓
Pry Here
✓
Clip
Peg
✓
✓
Battery Covers
✓
✓
Slot
Outer Lens
Peg Hole
✓
✓
✓