background image

                                                             

 

     

A               

8051 Development Board User Guide        ER-DBE029-1 

   

 

 

URL:  

www.buydisplay.com

         Document Name: ER-DBE029-1 User Guide-Rev1.0                Page: 15 of 15

 

 

buydisplay.com

EastRising

R

8.4 Operation 

  Use only the included AC adapter to power the board. 

  Observe the operating temperature limitations: from -20°C minimum to +70°C maximum with minimal 

fluctuations. Operation outside of these limits may shorten the life and/or harm the display. 

  At lower temperatures of this range, response time is delayed. 

  At higher temperatures of this range, display becomes dark. (You may need to adjust the contrast.) 

  Operate away from dust, moisture, and direct sunlight. 

 

8.5 Storage and Recycling 

 

 

  Store in an ESD-approved container away from dust, moisture, and direct sunlight. 

 

 

  Observe the storage temperature limitations: from -30°C minimum to +80°C maximum with minimal 

fluctuations. Rapid temperature changes can cause moisture to form, resulting in permanent 

damage.  

◇ 

Do not allow weight to be placed on the modules while they are in storage. 

◇ 

Please recycle your outdated displays at an approved facility. 

                                                                                                        

                 

 

Summary of Contents for ER-DBE029-1
















Reviews: