EASTMAN ETS-SLS-2, Instruction Manual

Page: 12 / 28

12
®
EASICUT Software
Easicut is Eastman Technology’s Windows 95 based oper-
ating software. It is used to run the machine as well as
setting tuning parameters. Following are a sample of Easicut
menus and screens with brief descriptions of their use.
1. The File menu is used to open, close, and save cut files.
Its Save As feature allows easy renaming of files. Exit closes
Easicut and returns you to the desktop.
2. Plot- this button sends the file currently open to the
plotter. You may open another file for viewing without chang-
ing the plotted file. Likewise, closing a file does not remove
it from the plotter. To determine which file is currently plot-
ted, look at the Control Panel or the Plotter Status in the
lower part of the main screen.
3. The Project menu is similar to the File button except
that it works with groups of files called projects. The user
specifies projects with the Project Manager. Typical projects
1. (File)
2. (Plot)
3. (Project)
4. (Options)
5. (Save)
6. (Complete Marker)
7. (Table Bite)
8. (Marker window)
9. (Control Panel)
10. (Calibration)
11. (Plotter Status)
12. (Projects)
The main screen displayed when Easicut is running.
(Easicut Version 1.04H)
13. Repeat File
(Not Shown)